I got some of these copper colored flowers from Bsueboutiques a while back and after cleaning in my workroom a package of these surfaced.
I decided to texture it with a cross peen hammer and then heated it with a torch while watching the surface. As the copper cools it begins to discolor in this case leaving a metallic iridescent color.
After texturing and adding the patina it was time to add the backing piece and a center. I chose to rivet it with a 3/32 copper rivet.
When assembled the tip of the rivet protrudes too much. about 2 thicknesses of playing cards is enough to make a proper head. No more than the diameter of the rivet itself should protrude above the surface.
I was ordering some raku from my favorite potter DG Midkiff better known on Etsy as wondrousstrange. This little woodland fairy matched the color of the copper and so was glued down with E-6000. The next installment I will create a wire bail for this piece.
Now to the winner of the drawing...drum roll please...My daughter picked from the entries and came up with Msjewel. If you will contact me at firstname.lastname@example.org with a mailing address I will send you the spoon. Thank you all for entering.